Tolerance Guidelines:Material tolerances not listed below shall be in accordance with the ASTM, ASME, or AMS specification to which the material was produced and certified.
Thickness: Bed size: Minimum width/length:.Minimum cut shape size:Minimum hole size:Kerf:
0.187” to 1.50”110" x 300”2× thickness with a minimum of 1”.2× thickness with a minimum of 1”.2× thickness with a minimum of 1”.Approximately 0.50”
Standard plasma cutting tolerances that apply to both the top and bottom surfaces are as follows:
If you require tighter tolerances, please contact one of our sales representatives.